Service Line︰886-4-25379937
繁體中文
Planetary gearbox and motor mounting instructions
1.
Double check the motor and gearbox size, then clean the mounting surface.
2.
Remove the plug on the adapter plate, then rotate the set collar till the bolt is line up.
3.
Check motor shaft size and insert bushing if necessary.
4.
Remove the key of motor, insert the balance key if necessary.
5.
Set at vertical position, and make sure set collar at correct position.
6.
Tighten the mounting bolt in 1~4 order with torque wrencch.
7.
Tighten the set collar bolt with torque wrench to specificed torque.
8.
Tighten back the screw plug.
